成人av日韩,亚洲精品麻豆,成年人视频网站

How long does it usually take to charge a BYD electric high-lift forklift?-

At present, most lithium battery forklifts are still using lead-acid battery bodies, which do not give full play to the small size and high specific energy characteristics of lithium batteries

Notice! Operating the electric pallet truck at low voltage for a long time will damage the battery life

As people pay more attention to environmental protection, electric forklifts are gradually replacing internal combustion forklifts Check whether to add water according to the display of the float0-8

In addition, it takes effort to choose a high-quality electric hydraulic transporter

They are light, make a little noise, and have average wear resistance

Notice! Operating the electric pallet truck at low voltage for a long time will damage the battery life

(5) It is strictly forbidden to shut down the engine and coast downhill with an internal combustion forklift

And the ambient temperature should not exceed 40℃ and should not be lower than -25℃ As the main model of traditional forklifts, counterbalanced forklifts have long occupied half of the forklift market with their unique advantages Battery compatibility: Batteries of electric forklifts of various brands are interchangeable, so the original batteries can still be used, allowing the components to maintain a longer service life

From 2015 to 2020, the domestic market share of overseas brands fell below 10%

How long does it usually take to charge a BYD electric high-lift forklift?- The telescopic fork is designed with a mid-position detection sensor and a travel limit sensor

First, battery consistency

Next, the electric forklift manufacturer will tell you several common parameters of electric forklifts

Therefore, AC motors require fewer components than DC motors, have no wearing parts that need to be replaced regularly, require almost no maintenance, are more efficient, and are more durable

This is an obstacle

The steering system, hydraulic control system, and acceleration and braking system are all transmitted by electrical signals, which greatly reduces the workload of operators and is very helpful in improving their work efficiency and accuracy

So, how can we complete the forklift of goods well? Electric forklift manufacturers have prepared a detailed tutorial for everyone

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

With the development of the economy and the improvement of environmental protection and energy-saving requirements, electric forklifts are developing rapidly

It is not allowed to stand on the fork or pallet to work

It became the first handling equipment in China to win the German "Red Dot Award", opening a new era of easy handling The most important thing when purchasing is to compare these factors that affect the price

How long does it usually take to charge a BYD electric high-lift forklift?- In recent years, with the country's emphasis on environmental protection and the development of green warehousing and distribution, the development and research of electric forklifts and environmentally friendly forklifts has become a clear trend in the development of China's forklift industry1*1

When the gear is adjusted to the tortoise speed, the speed of the battery truck will be limited, and it will not be too fast when accelerating

For the forklift market, the popularity of electric forklifts is getting wider and wider

Starting from the handle, the design of the truck is in line with the ergonomic handle to meet the load requirements of 1-5 tons

Generally, there are two specifications for the truck: the wide one is 685MM in width, the fork length is about 1200, and the general pallet size is 1200*1200mm; the narrow one is 550MM, the fork length is 1100MM, and the applicable pallet is 1000*1000

The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134

What are the operating procedures for electric forklifts? The current forklift field may already be the world of electric forklifts

Except for the forklift body, all parts of the forklift meet the explosion-proof requirements

Of course, the most widely known name is forklift

Excellent hydraulic station, low noise, small vibration, good sealing performance, automatic adjustment of no-load and full-load lowering speed to ensure smooth lifting and lowering warn! Do not operate an electric pallet truck with serious functional defects that endanger safety

If there is no abnormality during the retraction of the fork, after the fork returns to the middle position, in order to lower the center of gravity of the unmanned forklift, ensure the smooth and safe operation, and take into account the efficiency of cargo storage, the loading platform will fall back to 800mm above the ground

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info