91久久国产,神马久久一区二区,欧美成人综合在线

BYD Warehouse Forklift Repair Shop-

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

(8) When a forklift is operating, it is prohibited for people to stand around the forks to prevent the cargo from falling and injuring people

In terms of the sturdiness of the pallet, the nine-leg and Sichuan-shaped pallets are most suitable for electric transport trucks

However, the development of lithium battery forklifts still has many technical bottlenecks

The function of the safety valve is to allow the oil to flow back to the oil tank from the return pipe when the oil pressure in the system exceeds a certain value The application of wet braking has greatly improved the reliability of the drive axle

And the ambient temperature should not exceed 40℃ and should not be lower than -25℃

At present, major power battery manufacturers such as BYD, CATL, Guoxuan High-tech, Microvast Power, Anhui Yijiatong, etc

Enterprises must not underestimate the role of the parameter table, which can provide us with comprehensive information

If the DC contactor of the equipment is insensitive, replace it in time

The fork deflection detection error shall not be higher than the maximum design deflection of the fork

In 2020, benefiting from the rapid recovery of domestic industrial manufacturing from the epidemic, the overall production and sales of the forklift industry increased significantly

We look to the domestic market

BYD Warehouse Forklift Repair Shop- Slowly release your thumb, the direction and speed control buttons will automatically return to their original positions and the vehicle speed will decrease

It is not the case that cheap ones are good and expensive ones are profiteering; nor is it the case that cheap ones are of poor quality and expensive ones are perfect

How to choose a second-hand forklift 1

Before lifting the forklift, make sure the forklift is fully inserted into the bottom of the pallet

Unlike internal combustion forklifts, electric forklifts are recommended to be used on hard, flat surfaces

In addition, by optimizing the control strategy, adjusting the start-up stability of the drive wheel and the followability during sharp turns, it is ensured that the forklift will not slip even when driving on a wet and slippery indoor ground, and avoid overturning during sharp turns, effectively ensuring the safety of the operator

They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance

Except for a few warehouse forklifts (such as manual pallet forklifts) that are powered by manpower, the others are driven by electric motors

When welding, the electrode should be inclined 20°-30° in the direction of movement

There are three operating modes: walking, standing and riding

"Green logistics" is not only a guide for national policies, but also a responsibility of enterprises to society

Forklift bearing broken The forklift bearing is a very important hardware component on the forklift

The fill welding work starts from the drilled hole to the other end of the crack, and the weld is also welded on the reverse side

BYD Warehouse Forklift Repair Shop- Then check carefully to determine the crack boundary, and drill a ￠5-￠8mm limit hole 10mm beyond the boundary

Usually pay attention to the following points: 1

Maximum walking speed: 12km/h 3

Then some people ask, why do we still use electric pallet trucks when there are electric forklifts? In fact, this is just like what we usually use

The minimum turning radius refers to the minimum distance from the outermost and innermost sides of the vehicle body to the center of the turn when the electric forklift is unloaded, driving at a low speed, and turning the steering wheel fully

Freight is also very convenient, the body is agile, and most importantly, it is very environmentally friendly

Overloading or partial loading of goods is strictly prohibited Long service life, strong power, can completely replace traditional engines

Its weight is determined based on the rated lifting capacity of the forklift, and it plays a balancing role when the forklift is loaded

Advantages of unmanned forklifts With the improvement of my country's intelligent technology, my country's intelligent control system can also dispatch hundreds of unmanned forklifts at the same time

However, one thing that cannot be ignored is that the difference between manual pallet trucks and electric hydraulic trucks is that they are pulled by human power, which consumes a lot of manpower, especially on uneven ground, which is more labor-intensive and has low handling efficiency

When the operation is smooth, turn the handle of the electric pallet truck left or right to change the direction

What are the maintenance tips for electric forklifts? Electric forklifts are currently a more common type of forklift

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info