欧美一区一区,99动漫,天天影院色

BYD container forklift maintenance- The editor of New Energy Forklift will share it with you below: What are the operating procedures for electric forklifts? 1 As early as 2015, the "Guiding Opinions on Accelerating the Development of Life Service Industry and Promoting the Upgrading of Consumption Structure" issued by the State Council clearly pointed out: Actively develop new logistics service models such as cold chain logistics and integrated warehousing and distribution

At present, most batteries used in forklifts are lead-acid batteries, but they are gradually being replaced by lithium batteries

They can be divided into fully electric pallet trucks, semi-electric pallet trucks and manual pallet trucks Stay away from forklift operation areas (including the rack centralized placement area), specifically: (1) Do not take shortcuts and go directly through the forklift operation area; (2) Do not take a rest in the gap between the racks because you are tired; (3) When working with suppliers to confirm and inspect parts, do not use the forklift operation area for convenience In the future, they will replace internal combustion forklifts and manual forklifts and become the backbone of logistics equipment

2m, and the maximum lifting height can reach 11 meters

The door frame shall not be deformed or welded off

While it brings fast handling to warehouses, docks, airports and other places, it also requires everyone to be cautious and careful with the operation of forklifts

Check the sensitivity of each control system Generally, electric forklift manufacturers will recommend customers to use electric forklifts in a suitable environment If there are customers who want to find electric transport truck agents or electric pallet truck wholesale manufacturers, they can directly call Anhui Yufeng Warehousing Investment Department for negotiation

BYD container forklift maintenance-

Hydraulic system In terms of hydraulic synchronization, in order to avoid uneven loading of goods, uneven force on the four cylinders, and asynchronous movements, a gear-type hydraulic synchronous motor (also known as a split-flow motor) is designed at the center of the four cylinders

They are widely used in the warehousing industry because of their compact body, flexible mobility, light weight and good environmental performance

For transport trucks, there is only one size of fork legs, wide, narrow, long, short, single wheel or double wheel

After the electric forklift starts, you need to drive the electric forklift to the front of the goods and enter the working position

Check the turn signal; 5

The electric transporter manufacturer tells you that when the speed is adjusted to the rabbit speed, it is suitable for use in wide places with few people and suitable for driving longer distances

Parking (1) Release the direction select switch

, Ltd

Everyone needs to be aware that if you use an electric forklift in a place with very low temperatures, the battery electrolyte may freeze

Air cooling must not contain flammable and explosive gases

Relying on the group's advanced core technology advantages such as batteries, motors, and electronic controls, BYD Forklift has successively developed counterbalanced forklifts, reach forklifts, pallet trucks, stackers, tractors and other products Generally, it is one year or 1,000 hours (whichever comes first)

The polyester tire with steel mesh can ensure that the forklift has sufficient driving force and good handling effect even on the frozen ground

BYD container forklift maintenance- Cause: The charger operating voltage is out of regulation or faulty Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment The hydraulic synchronization solution described in this article can be applied to the design of forklifts with double telescopic gantry structures

and Anhui Wannan Xinwei Motor Co

When welding, the electrode should be inclined 20°-30° in the direction of movement When driving on a larger slope allowed, the operator must keep the cargo on the counterbalanced electric forklift and slow down at the same time, and never accelerate

AGV is applied to forklifts, and the AMS automated management system, AGV hardware equipment and management system (NDC) are established to build a full-process logistics management system, realize dynamic monitoring of warehouse goods, and realize the traceability and visualization management of logistics transportation

0SD offers increased speeds when loading and unloading, making it ideal for travelling long distances or working at loading docks

Hydraulic device The pump is installed in an oil tank, and a pump motor, a pump and an oil tank body are compactly installed

Hydraulic oil, gear oil, and lubricating oil all use special low temperature resistant grease, which can enable the vehicle to obtain long-term stable hydraulic and transmission performance in the cold storage

So how do we troubleshoot these faults? The following editor will give you a brief introduction

Before starting work each day, a careful inspection must be carried out according to the inspection contents before work can begin; 5

As the name suggests, a warehouse forklift is a forklift designed for handling goods in warehouses

The function of the outriggers is to ensure the stability of the forklift when loaded

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info