国产成人久久精品麻豆二区,黄网址在线免费观看,亚洲高清电影

Product

Select a product to view

BYD Forklift

Core Features

BYD forklifts can easily handle any working conditions

High security

Turning speed limit Hill climbing protection Overload protection

high performance

Fast driving speed, fast lifting speed, strong climbing ability

High efficiency

Fast charging, power saving, multi-shift operation

High Match

Relying on the company's advanced battery, motor, electronic control, hydraulic system and other core technologies to create the ultimate vehicle performance

Low overall cost

Five-year data shows that detailed statistics on maintenance costs, operating costs, purchase costs, etc. can save 80% of costs compared to fuel forklifts and 30% of costs compared to lead-acid battery forklifts.

Super fast charging

Through disruptive battery and fast charging technology, charging time can be shortened by 90%, reducing waiting time, improving efficiency and creating unlimited battery life

Ultra-long life

BYD lithium battery has a capacity retention rate of more than 65% after 4,000 cycles of charge and discharge under normal charge and discharge conditions, and no battery replacement is required during the life cycle.

No charging room required

No need for charging room No need to add electrolyte No need for backup battery Change the forklift management mode and cope with various working environments calmly

BYD Manufacturing Special Forklift Phone Number-

When working in multiple shifts, electric motor-driven warehouse forklifts need to have backup batteries

An explosion-proof electric forklift is an electric forklift specially designed for working in explosion-proof environments

Just remove two bolts and take off the rear cover, and the main key components can be immediately inspected and repaired

The double-drive axle makes maintenance easier to operate and more convenient

The following BYD forklift editor will introduce to us the advantages of forklift lithium batteries compared to lead-acid batteries If necessary, use a soft, lint-free, clean white towel to clean the carbon powder on the surface of the phase change groove and the motor commutator

As the name implies, electric hydraulic forklifts are storage and logistics equipment suitable for warehouse operations

Check whether the connection of the motor unit outlet (or terminal) is correct and reliable For three-dimensional storage based on unmanned forklifts, the safety inspection is mainly considered from two aspects: the vehicle body itself and the loading device connected to the vehicle body warn! Wheel slip is not allowed The following BYD Forklift Editor will introduce the specific maintenance techniques for electric forklifts When driving indoors, the speed should not exceed 5km/h

It is also very suitable to consider this in the future

BYD Manufacturing Special Forklift Phone Number-

To ensure that the brake has sufficient braking torque, the air gap must be readjusted before the air gap reaches the maximum air gap value

The market demand for cold storage forklifts is huge

During the unloading process, rapid descent and unloading are strictly prohibited; 12

When adjusted to the rabbit speed, it is suitable for use in wide and sparsely populated places and for driving over slightly longer distances

0 to 8

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

Gasoline forklift: 1-7 tons, including single fuel and dual fuel

The fill welding work starts from the drilled hole to the other end of the crack, and the weld is also welded on the reverse side

It also reduces the huge workload caused by labor costs

It is often used for stacking and loading and unloading of goods in warehouses

2 In short, the development history of forklifts reflects the economic development curve 2

BYD Manufacturing Special Forklift Phone Number-

Below, the editor of BYD forklifts will tell you about some of its requirements during operation and loading and unloading

Compared with traditional forklifts, electric forklifts are quiet, pollution-free, have low operating costs, long service life, and require less maintenance

The operation using pallets is efficient, safe and stable, so it has now been widely used in production, transportation, warehousing and other fields

After the electric forklift starts, you need to drive the electric forklift to the front of the goods and enter the working position

Hangcha Group, together with Contemporary Amperex Technology Co

Finally, the fork is retracted and the loading platform falls back to the low position

3 After a careful inspection, we can usually find that the abnormal noise of the electric pallet truck is caused by damaged parts or maintenance

When driving on a larger slope allowed, the operator must keep the cargo on the counterbalanced electric forklift and slow down at the same time, and never accelerate

What are the maintenance methods for electric forklift masts? If the mast of an electric forklift is deformed, it will affect the safe operation of the forklift Compared with traditional electric pallet trucks, it is more compact and flexible, can operate in narrow spaces such as carriages and elevators, is easy to operate, and has a more acceptable price The forks are two forged forks bent at 90°, mounted on a sliding bracket, and are used to carry materials

Compared with the forklift with extended legs, the front wheels are larger and the outriggers are relatively high

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info