在线播放国产一区二区三区,欧美激情精品久久久久久,国产精品久久久久久久

BYD electric forklift company has which factories-

Generally speaking, the larger the load capacity of a forklift, the more expensive it is

Prevent vehicles from carrying people; 7

The most prominent advantage of AC motors is that they do not have carbon brushes and are not subject to current restrictions like DC motors For example, Hangcha's electric lift flatbed truck

Check whether the emergency cut-off switch of the electric pallet truck is turned off

In the industrial vehicle industry, BYD has made the greatest contribution to the use of lithium batteries in forklifts

Electric forklifts are driven by electricity

After lowering the forks to the lowest position, withdraw the electric pallet truck There are two installation methods for the travel motor: vertical and horizontal motors

In addition, the quality of the electric truck's motor, battery and other important parts also determines its price

(5) It is strictly forbidden to shut down the engine and coast downhill with an internal combustion forklift

Long service life

When an electric truck is used with a pallet, the pallet should be selected based on the load range and configuration of the electric truck and the material and specifications of the pallet

BYD electric forklift company has which factories- Improve production efficiency and complete material handling tasks efficiently, accurately, and flexibly

In the new regulations of "Technical Safety Regulations for Special Motor Vehicles within the Site (Factory)" (TSG 81-2022), forklifts should be equipped with driver authority collectors, driver sitting (standing) posture perception systems, etc

Cab and interior heating When working in a low-temperature or even ultra-low-temperature cold storage, the cab should be equipped to improve the working environment

The forks are raised by an advanced electric hydraulic pump, and the forks are raised and lowered by the lifting and lowering operating handle

More environmentally friendly, no corrosion, lead-free, safe to use, and can be recycled even when its service life is up

The third is three-dimensional warehousing based on unmanned forklifts[1], which is mainly used in scenarios with medium and low shelves and multi-channels

It is an indispensable equipment in logistics and transportation

Before starting an electric forklift, you must check whether all parts are in good condition, and check the performance of all operating components and safety devices

When choosing, enterprises should consider their own operating requirements, budget, working environment and other conditions comprehensively to choose the most suitable truck

High safety

Features: 1

Due to the mature market development, manual trucks are economical, comfortable, and labor-saving

They fully consider the safety and comfort of the driver and combine many ergonomic designs to make it easier for the driver to get through the running-in period

BYD electric forklift company has which factories-

, a subsidiary of Hangcha Group, achieved sales of 120 million forklift AGV bodies in 2019

The basic operation of an electric truck is to raise and lower the forks, and move the vehicle forward and backward

Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

1 times to 0 Regardless of the price of the forklift, if the electric forklift has been working in a low temperature environment for a long time, it should be placed in a warm indoor environment for a period of time before charging it indoors The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134 The following BYD forklift editor will introduce it step by step (5) Throttle valve, installed in the pipeline of the lifting hydraulic cylinder, its function is to increase the flow resistance of the oil, and ensure that the fork descends slowly when the lifting hydraulic cylinder releases pressure

High stability coefficient: All mechanical material equipment must make progress in stable design, otherwise it will be difficult to develop in the long run

Electric forklifts are now very commonly used logistics and warehousing equipment

When the equipment is working, operate the bucket, blade and various control devices slowly, and prohibit high throttle, impact, scraping, shoveling and pushing, etc

It mainly includes inspection before use, inspection during work and maintenance after returning to the warehouse

Avoid closed areas, or maintain the ventilation and drainage performance of the closed system, open the ventilation window to maintain the heat dissipation and ventilation performance of the motor, open a leakage hole at the bottom of the battery box or install a reservoir

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info