亚洲成年人av,91久久精品国产,黄色大片免费观看

How to drive BYD stand-up electric forklift- Be careful! Unauthorized driving is not allowed Widely used in major workshops, transfer centers, etc

Check whether the contact points are worn

The hydraulic oil temperature is too high, resulting in a decrease in viscosity and deterioration, and it needs to be replaced in time

Electric forklift manufacturers adjust speed, which is relatively complicated, has high requirements for AC operation, must be used for a long time, and the price is also high

The combined effects of subtropical, humid tropical, marine climate environment and industrial waste gas and dust cause corrosion and damage to the parts of internal combustion forklifts

Regardless of the brand of electric forklift, if it is a lithium battery, it is necessary to regularly check whether the electrical socket can be used normally and whether the battery casing is damaged

Compared with imported electric trucks, domestic electric trucks generally do not have a power steering system installed

Especially in ports, logistics and warehousing, pharmaceutical, food, textile and other industries, electric forklifts are gradually replacing internal combustion forklifts

Full load operation is not allowed

The key parameters of unmanned forklifts involved in this article are shown in Table 1: Among them, in order to effectively reduce the width of the stacking channel, the minimum stacking channel width was reduced from the traditional 3 meters to 1

How to drive BYD stand-up electric forklift-

For example, the oil tank can be perforated, which is more conducive to the coverage of the spray gun nozzle and the shot peening treatment of the surface

Use the DC voltage range of the multimeter to measure the voltage across the battery

Therefore, when using an electric transport truck, it must be used in a standard manner, and at the same time, attention must be paid to its maintenance and care to extend its service life

As the name suggests, an electric pallet truck is a type of truck that uses a battery as its power source and an electric motor as its motive force, while a manual pallet truck mainly relies on manpower to operate

The fifth step is to slowly lift the fork

This is mainly due to the high proportion of self-produced parts

The driver has to stretch his neck to barely find the correct position based on experience! If it is not accurate, the goods will tip over 2

During operation, pull up the handle to release pressure and the fork will go down; pull down the handle to increase pressure and the fork will go up

This allows the forklift to reach a traction power of about 60kW, which is equivalent to the performance of a 100kW thermal engine, thus achieving an important milestone in performance

Especially in ports, warehousing, tobacco, food, textile and other industries, reach electric forklifts are gradually replacing internal combustion forklifts

You should be careful before buying a forklift and do not trust the seller's words to avoid unnecessary trouble and loss

It can provide sufficient electrical energy according to the corresponding instructions

How to drive BYD stand-up electric forklift- 1

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

(5) Throttle valve, installed in the pipeline of the lifting hydraulic cylinder, its function is to increase the flow resistance of the oil, and ensure that the fork descends slowly when the lifting hydraulic cylinder releases pressure

With the development of economy and the improvement of environmental protection and energy saving requirements, all-electric reach stackers are developing rapidly

When the electric forklift is moving, it is not allowed to turn the azimuth switch to change the driving direction to avoid burning electrical components and damaging the gears

This puts higher demands on the product line layout, product design and technological innovation capabilities of related companies, such as achieving lighter weight, better load-bearing capacity and higher cost-effectiveness through lightweight design

Electric pallet truck manufacturers can tell companies with certainty that electric pallet trucks, as a popular device at present, are very safe

It ensures the safety and normal operation of batteries and vehicles through a series of management and control Battery charging ① Connect the charger plug to the battery power plug, turn on the charger to charge the battery Good mobility, diversified working performance, reducing other loading and unloading equipment, reducing the investment of the entire handling facility

The special low-temperature working environment of the cold storage will have many impacts on the normal operation of the forklift 3

The neutralization position of the carbon brush has been adjusted on the test bench of the factory, and customers are not allowed to disassemble and adjust it at will

The difference is that all operations of a fully electric pallet truck are controlled electronically, without the need for manual operation 6

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info