青青草国产精品,亚洲毛片视频,涩视频

Where is the professional maintenance point for BYD warehouse forklift?-

High-performance electric forklifts, reach electric forklifts, narrow aisle electric forklifts and other compact electric warehouse forklifts are very popular in the market

The new generation of electric warehousing equipment such as electric forklifts, small electric stackers, and small electric transporters will have a strong impact on old forklift products such as internal combustion forklifts and manual forklifts

The reach truck is similar to the leg-type forklift in that the center of gravity of the goods falls within the support plane of the vehicle, so it has good stability

They are not affected by severe cold or hot environments, including working in some environments with poor lighting, etc

Its weight is determined based on the rated lifting capacity of the forklift, and it plays a balancing role when the forklift is loaded

Use of charger ①The charger we equip for stacker trucks has excellent constant current characteristics and extremely fast overcurrent protection capabilities

When entering or leaving the work site or driving, pay attention to whether there are obstacles above

Safety testing plan The system safety inspection of intelligent three-dimensional storage is a prerequisite for the normal operation of the project and is also a key design object

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle

The electric walk-behind warehouse truck is the third type of forklift (III) in the classification of the World Industrial Truck Statistics Association

It has made a huge contribution to the transformation from manual handling to mechanized handling

Electric pallet trucks are driven by electricity, and the movement is controlled by the switch on the handle of the operating arm, and the steering is controlled by the operating arm

Where is the professional maintenance point for BYD warehouse forklift?-

When the gap between the main bearing and the journal is too large, the front and rear oil seals will leak oil at the crankshaft head or the clutch due to sealing loss, causing the electric pallet truck friction plate to be contaminated and slip

Under the general trend of "energy saving and environmental protection", specialization, automation, intelligence and new energy technologies have become major opportunities for the development of the forklift industry

Anti-rust and anti-corrosion measures The temperature difference between inside and outside of the cold storage will cause the forklift to "sweat" after leaving the cold storage

Electric forklifts store energy in batteries and work with electric drive

(2) Heavy-duty forklift: It uses a diesel engine as its power source, has a load-bearing capacity of 10

Check before use: (1) Check whether the fuel, lubricating oil, hydraulic oil and coolant are sufficient

The battery is the power source of the vehicle and should be charged in time and maintained frequently

At present, most batteries used in forklifts are lead-acid batteries, but they are gradually being replaced by lithium batteries

In terms of load-bearing, manual trucks rely on manpower, so its load capacity takes into account the human tolerance range, while electric trucks rely on electricity and drive wheels, so in this respect, the load capacity of electric trucks is greater than that of manual trucks

One side of the item should be against the shelf, and the weight of the fork load should comply with the requirements of the load center curve sign Notice! Operating the stacking forklift at low voltage for a long time will damage the battery life

Hazardous characteristics

Where is the professional maintenance point for BYD warehouse forklift?-

Clean the lifting chain, chain shaft and add lubricating oil

, so as to avoid objects flying up and injuring people In a low temperature environment, the battery of an electric forklift will consume more power faster, the charging time will be longer, and the use time will be greatly shortened

The following is shared by BYD forklift editor: In the past two years, I have visited many forklift manufacturers in China

Full AC control system 5

Low maintenance cost: 1-year warranty for the whole vehicle, free repair within 1 year, and replacement with a new vehicle within 3 months; 8

When entering or leaving the work site or driving, pay attention to whether there are obstacles above They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance At the same time, due to the heavy weight of the cargo, in order to ensure the rigidity of the telescopic gantry at a high position, this unmanned forklift is designed with a double telescopic gantry

The speed of BYD forklifts can be set to 10KM/H, and the functions of turning speed reduction and high-speed limit are equipped to further ensure the safety of goods and personnel; the humanized design makes the driver more comfortable to drive

If the forklift is also treated as a cloud forklift, the handling volume of unmanned warehousing will increase exponentially

During operation, the outriggers cannot penetrate the bottom of the goods, and the mast can move along the track inside the outriggers with the entire lifting mechanism

The oil leaking from the crankshaft rear oil seal will enter the clutch, which will cause the clutch plate to slip or even burn

Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info