欧美日韩精品,激情专区,日韩精品网站

What are the maintenance contents of BYD lithium-ion reach forklift?-

Next, the electric transport truck manufacturer will talk to you about the factors that determine the price of the electric transport truck, so that you can refer to it when purchasing

Correct use and maintenance are related to the service life of the forklift

(5) When using a fork to pick up goods, the fork should be inserted as deep as possible under the load, and care should be taken that the fork tip does not touch other goods or objects

Models with fixed platforms are also available

Check the reversing buzzer and hazard warning lights; 7

Use a jack to lift up the entire forklift, then place wood under it and pay attention to safety

The product used in this solution is the 610X in the 600 series wheel drive planetary gearbox, which best meets customer needs and can be connected to high power density electric motors

At this time, the plate will appear rotten, and the active material will form blocks and accumulate between the two separators, resulting in a decrease in the capacity of the battery

The most prominent advantage of AC motors is that they do not have carbon brushes and are not subject to current restrictions like DC motors

The steering operation is the same as the way we drive a car, and the forklift bearing and forklift fork can be controlled by the joystick

What advantages do lithium batteries have over storage batteries in electric forklifts? The use of lithium batteries in electric cars is affected by factors such as the popularity of charging equipment, the limited range of driving, and the wide and uncontrollable travel area Electric transport trucks can be said to be indispensable equipment in warehousing and transportation

What are the maintenance contents of BYD lithium-ion reach forklift?- Management inspection ① Forklifts should be regularly maintained and inspected to prevent fatigue and wear of parts, and to detect potential hidden dangers in time before serious damage occurs The maintenance method is not difficult5 to 5 The fill welding work starts from the drilled hole to the other end of the crack, and the weld is also welded on the reverse side However, the voltage rises very quickly, the electrolyte boiling phenomenon occurs earlier than normal batteries, and the charging time is greatly shortened

If necessary, add 45# hydraulic oil

"Green logistics" is not only a guide for national policies, but also a responsibility of enterprises to society

Power battery products need to be safe, have high energy density and good high and low temperature performance, and they need to have high consistency

Compared with traditional electric pallet trucks, it is more compact and flexible, can operate in narrow spaces such as carriages and elevators, is easy to operate, and has a more acceptable price

Electric transport trucks are no exception

While it brings fast handling to warehouses, docks, airports and other places, it also requires everyone to be cautious and careful with the operation of forklifts

BYD's iron battery technology has a long service life and improved operational safety

When driving with loads, if the forks are raised too high, the overall center of gravity of the forklift will increase, affecting the stability of the forklift

, another important consideration is the price of the forklift

What are the maintenance contents of BYD lithium-ion reach forklift?-

In order to reduce the occurrence of failures and extend the service life of the forklift, regular maintenance is very necessary

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

What are the advantages of electric transport vehicles What are the advantages of electric transport vehicles? 1 Warehouse forklifts are mainly designed for handling goods in warehouses

The rapid development of electronic control technology has made the operation of electric forklifts more and more comfortable, with a wider range of applications and more and more solutions to logistics

After the forklift has been operating for a specified period of time, it should leave the cold storage and rest and replace the battery in the buffer zone

(7) Check whether the tools and accessories on board are safe Inspection items during work: usually within 2 hours of work (1) Check the working condition of the engine, chassis, working device, hydraulic system, instruments and signal devices (2) Check whether the temperatures of the wheel axle, brake drum, transmission, torque converter, gear pump and drive axle are normal

The key processes of the entire production line are equipped with the industry's latest production equipment, and are also equipped with self-developed automatic assembly lines, representing the current leading level of equipment technology

At the same time, more and more companies began to enter the field of electric forklifts, and made continuous breakthroughs and diversified innovations around the core technologies and products of electric forklifts, which promoted the further improvement of the level of domestic electric forklifts

When the electric forklift is moving, it is not allowed to turn the azimuth switch to change the driving direction to avoid burning electrical components and damaging the gears

, jointly invested in the establishment of Hangzhou Pengcheng New Energy Technology Co

However, the electric transport trucks that you buy from electric transport truck manufacturers have many unique advantages

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info