中文字幕在线观看,亚洲女人天堂成人av在线,噜噜网站

What are the daily maintenance contents of BYD lithium battery electric forklift?-0 to 52 The use of helical teeth ensures optimal meshing, reduces noise levels and thus reduces noise pollution During operation, pull up the handle to release pressure and the fork will go down; pull down the handle to increase pressure and the fork will go up

In this regard, the customer had tried to install only a single-motor drive axle, but this did not solve the problem because the single-motor drive could not reach the same power level as a traditional internal combustion forklift

The new stand-on electric pallet truck S2

It has the advantages of simple and flexible operation, fast lifting of goods, high efficiency, noise reduction and no pollution

Use the DC voltage range of the multimeter to measure the voltage across the battery

Therefore, in addition to basic driving skills, drivers must not only learn how to load and unload goods, but also learn how to use electric forklifts to accurately and quickly pick up and unload goods The speed limit when carrying goods in the warehouse is 5KM/h

When we usually repair forklifts, we often find that many customers' forklifts are rusted or even corroded

Another very common problem with all-electric truck batteries is the corrosion of the positive plate grid 1 Except for the forklift body, all parts of the forklift meet the explosion-proof requirements

1-day inspection ① Check whether the battery is fully charged (you can also check the side surface of the battery)

Instead, it can turn the operating arm to move forward or backward to bypass the obstacle

What are the daily maintenance contents of BYD lithium battery electric forklift?-

It is not allowed to use inertia to unload; 3

A pallet truck is a type of warehousing logistics equipment used for cargo handling

So, what problems are prone to occur with the plate? What are the symptoms? What are the reasons? Next, the truck manufacturer will tell you about it

Cab and interior heating When working in a low-temperature or even ultra-low-temperature cold storage, the cab should be equipped to improve the working environment

Warehouse staff have to operate and record at the same time, which may lead to negligence, errors and omissions, and even affect the subsequent work; Improve accuracy: Inaccurate inventory of cargo locations will cause difficulty in finding goods during picking, disrupt picking routes, and thus reduce picking efficiency and accuracy; Improve operational efficiency: If it is impossible to monitor the internal warehousing logistics in a timely manner, and there is a lack of analysis of product data and shipping order data, warehousing management will be difficult and operational efficiency cannot be guaranteed

Move the joystick to adjust the height of the forks so that the forks are at the same height as the gap at the bottom of the cargo

Before working every day, you should first check the following safety features: ※ The speaker functions normally

The development of this industry should also break through the previous industrial development ideas, use advanced management and development ideas to provide sufficient financial support and rich technical reserves for the development of the industry, and promote the rapid development of the entire industry

The most commonly used is lead-acid battery, which requires regular inspection of the battery fluid level

The unmanned forklift moves to the corresponding point in the shelf area through straight-moving, sideways movement, turning and other actions according to the instructions of the WCS warehouse control system

Intelligent forklift solutions reduce the burden of warehousing operations Under the pressure of improving service levels, reducing inventory, saving time and minimizing costs, it is obviously becoming more and more important to have more intelligent and information-based warehousing equipment

The four categories of forklifts mainly include: Class I electric counterbalanced forklifts, Class II electric ride-on warehouse forklifts, Class III electric walk-behind warehouse forklifts, and Class IV/V internal combustion counterbalanced forklifts, Ltd

Moreover, it has no environmental pollution, is small in size, and is light in weight, making it the most widely used battery on the market

What are the daily maintenance contents of BYD lithium battery electric forklift?-

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

Warehouse electric forklifts should slow down when turning, pay attention to the contact and collision between the goods in front and the rear of the vehicle, and turn slowly

When charging, unplug the power socket and connect the charger plug to the movable socket with a handle

If the driving control switch is loose and causes failure, lock it in time

Manipulator arm During driving, the electric pallet truck is controlled by the manipulator arm to travel and turn, and the maximum turning angle of the manipulator arm is about 180 degrees Low maintenance cost: Current electric forklifts all use AC motors, which do not require carbon brushes Because it is pollution-free and has low noise, it is widely used in indoor operations and other working conditions with high environmental requirements, such as the pharmaceutical and food industries Impact of low temperature environment on hydraulic system Hydraulic oil used at room temperature is prone to freezing in low-temperature environments, requiring the viscosity of the hydraulic oil to be higher than that of ordinary hydraulic oil; in addition, hydraulic high-pressure hoses are also prone to fatigue, brittleness and hardening at low temperatures The third step is to adjust the height of the forks

For the forklift market, the popularity of electric forklifts is getting wider and wider

Electric transport trucks are no exception

Currently, most lithium-powered cars are used in commuter cars, electric maintenance vehicles, sanitation vehicles, and short-distance buses

Before using the explosion-proof electric forklift, it is necessary to conduct a safety inspection on the explosion-proof electric forklift to ensure that the equipment is in good condition and the operation is safe and reliable

They can be seen in warehouses, factories, airports, docks, convenience stores and other places

The most familiar industrial transporter is the forklift

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info