日韩在线免费观看视频,久久性视频,国产三区四区

BYD stand-on electric forklift daily maintenance includes-- The minimum mast tilt should be used to stabilize the load to prevent the load from sliding backwards

The application scenario guarantees the confidence of the product

In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo

Considering that there is no unified standard for calculating the height of electric forklifts, electric forklift manufacturers may not be able to match the shelf height with the lifting height of the forklift, and companies are required to provide detailed data based on their own circumstances

For the forklift market, electric forklifts are becoming more and more widely covered

Consider the issue of pneumatic tires and solid tires

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

Cab and interior heating When working in a low-temperature or even ultra-low-temperature cold storage, the cab should be equipped to improve the working environment

High-position side fork detection: Test the stability of the side fork at different loads, different side fork heights, and different fork entry speeds 2 Compared with the forklift with extended legs, the front wheels are larger and the outriggers are relatively high

Common tonnages of manual trucks are 2 tons/2

The driver must study it carefully

The basic operation of an electric truck is to raise and lower the forks, and move the vehicle forward and backward

BYD stand-on electric forklift daily maintenance includes--

Anti-condensation measures The forklift's control equipment is safely housed in a sealed enclosure, which prevents condensation from forming and corroding the control equipment

The research and development, design, manufacturing and modification of the AGV body were independently completed In the following years, Zhongli continued to innovate and launched products with innovative design concepts such as "Big King Kong" and "Micro King Kong" Step 6

Before using the explosion-proof electric forklift, it is necessary to conduct a safety inspection on the explosion-proof electric forklift to ensure that the equipment is in good condition and the operation is safe and reliable

It should also be noted that no matter what brand of electric forklift, some valves or parts have high requirements for cleanliness and need to be cleaned regularly to keep them clean If dust or other dirt is found, it should be cleaned in time

Safety is the most important part of the equipment

5 meters

With the development of the economy and the improvement of environmental protection and energy-saving requirements, electric forklifts are developing rapidly 10

It reached a price that could replace manual lifting

In addition to the function of transporting goods, the portable electric forklift has a hydraulic device between the chassis and the wheels to facilitate the lifting and lowering of goods

When the electric transport truck is not in use, put the fork to the bottom and store it in a designated location without affecting other operations

BYD stand-on electric forklift daily maintenance includes-- The second reason is that the charging and discharging current is too large, and the plate is twisted and deformed

There are many ways to classify forklifts: according to the structural type and characteristics of the forklift, the mass that the forklift can lift, the movement mode of the forklift, etc

The above are two common problems with the plates of all-electric transporter batteries

When the battery is arranged on the rear axle, the maintenance of the motor and hydraulic pump is more convenient, because after removing the battery and the pedal, the motor and hydraulic pump are clearly visible You should be careful before buying a forklift and do not trust the seller's words to avoid unnecessary trouble and loss

When the inspection agency conducts regular (initial) inspections, the inspection items should include the inspection of safety monitoring devices

In terms of electric forklift product categories, in 2020, electric walk-behind warehouse forklifts accounted for the largest sales volume, accounting for 79%; followed by electric counterbalanced ride-on forklifts, accounting for 18%, and electric ride-on warehouse forklifts, accounting for 3%

The battery is the power source of the vehicle and should be charged in time and maintained regularly

Indeed, the openness of hardware configuration is almost the same as the opening up of the entire Apollo ecology

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info