亚洲成人精品一区,高清久久,毛片软件

BYD ECB60 Explosion-proof forklifts Manufacturer Manual trucks use a manual hydraulic pump to lift and lower the equipment through manpower, while electric trucks use a power source battery, a drive motor, and a drive wheel to achieve lifting and lowering

The neutralization position of the carbon brush has been adjusted on the test bench of the factory, and customers are not allowed to disassemble and adjust it at will

Based on the market application scenario, the key parameters, safety detection, and storage action flow of the product are first designed overall; then, for the hydraulic synchronization problem in the lifting system, specific design schemes are proposed from the mechanical structure and hydraulic system aspects; finally, the feasibility of the scheme is verified through prototype testing

Electric trucks use imported electronic controls, handles and other circuit control components and hydraulic components, and are relatively expensive

, Linde (China), and Lonking

When the solenoid, manual reversing valve, or one-way valve is blocked by waste or the sealing ring is worn, causing internal leakage in the equipment, the valve components must be cleaned and the worn seals replaced in time during daily use

The double-drive axle makes maintenance easier to operate and more convenient

Flexible control and precise positioning; 3

Forklifts originated in the United States, flourished in Japan, started late in China, but have developed rapidly

The normal height is about 3 meters, and the high height is more than 10 meters

Before moving the forklift, you must check whether the brakes and batteries are fully charged

The operation is simple and flexible

Try to turn slowly

After arriving at the destination, the chassis is lowered by hydraulics, and the goods fall to the ground with it, so the transport vehicle can be easily pulled out, eliminating the complicated process of manual handling

BYD ECB60 Explosion-proof forklifts Manufacturer

It starts with one button and releases pressure with a foot pedal

When using electric forklifts in winter, the most important thing to pay attention to is battery maintenance The staff who heard the abnormal noise did not take the corresponding emergency measures in time, resulting in the shaft being scrapped

The electric forklift manufacturer told the company that the width of the shelf must be carefully calculated and the safety issue should not be underestimated

From the above we can see that it is not difficult to find the cause of the abnormal noise of the electric pallet truck, but it requires the driver to have enough patience to solve it

Before buying, you should consult the merchant about the service life

So, how wide should the passage be reserved to make the best use of the factory? The electric forklift manufacturer will explain it in detail

During storage, it should be kept clean and avoid moisture and harsh climate environments

The whole vehicle structure is shown in Figure 2

The battery is the power source of the vehicle and should be charged in time and maintained regularly

In addition, the width of the right-angle stacking channel should also be considered, which means that the electric forklift can safely pass through when turning 90 degrees in the corridor

8T, 2T, 2

Non-drivers are strictly prohibited from sitting on the forklift while the vehicle is in motion

The temperature difference between the inside and outside of the cold storage will cause the vehicle body to "sweat" and produce condensed water, which will cause the structural parts to rust and damage easily

BYD ECB60 Explosion-proof forklifts Manufacturer

In applications that require very low noise, it is recommended to readjust the air gap within the maximum air gap range

Generally, it is one year or 1,000 hours (whichever comes first) If you don’t know much about Chinese forklifts, you can refer to the manufacturer’s strength, user reviews, qualifications, etc Polyurethane, nylon, rubber and other casters are used to meet the requirements of various environments for handling tools Here we introduce to you a counterbalanced forklift AGV independently developed and produced

After purchasing an electric pallet truck, companies must provide systematic safety training for drivers

If we don’t have any heavy goods or heavy things that need to be transported in life, we don’t need to buy them for our own use

Controlling the operating speed can control the magnitude of the travel motor force

After charging is completed, reset the power socket

's FJ-D1 high-efficiency AC controller and M1 smart instrument components, and Zhengzhou Jiachen Electric Co

The following is shared by BYD forklift editor: 1

This is mainly due to the high proportion of self-produced parts

Security As an industrial vehicle, safety is definitely something we need to pay attention to

When transporting goods on a steeply inclined ground, pay attention to the firmness of the goods on the forklift forks

The application scenario guarantees the confidence of the product

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info