国产成人免费视频,91不卡,综合久久综合

BYD new energy warehouse forklift charging process picture-

Mechanical structure To achieve synchronous lifting of hydraulic cylinders, mechanical synchronization is often the simplest and lowest-cost solution

Standing driving, walking, side driving, guard plates, pedals all have different variables 1

Due to the different properties of the fuel used by electric forklifts, electric forklifts can be divided into three types: the first is a forklift that is driven only by electrical energy (such as batteries, lithium batteries), that is, a pure electric forklift; the second is a hybrid forklift; the third is a forklift that is powered by a fuel cell (such as hydrogen fuel)

Low maintenance cost: 1-year warranty for the whole vehicle, free repair within 1 year, and replacement with a new vehicle within 3 months; 8

There are many specifications with and without pedals

The fully electric pallet truck is powered by electricity

Therefore, lithium batteries have not been widely used for a long time and are only used in some portable electronic devices

The following BYD forklift editor will share with you the precautions for using a forklift: 1

In 2019, China's industrial vehicle industry entered a period of adjustment, and the trend of forklift electrification became more prominent (4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

Finally, modular modeling is carried out through 3D software, and the rationality of the design is verified through prototype testing to ensure that the product has the advantages of narrow stacking channel, high storage efficiency, and high storage capacity rate

3 4

BYD new energy warehouse forklift charging process picture-

The following subdivided industry application scenarios will help you understand the technical advantages of BYD's new energy forklifts

To be on the safe side, the driver is advised to check whether the braking system of the electric pallet truck is normal, whether the emergency power-off button is normal, whether the battery is sufficiently charged, whether there is any damage, etc

Based on the market application scenario, the key parameters, safety detection, and storage action flow of the product are first designed overall; then, for the hydraulic synchronization problem in the lifting system, specific design schemes are proposed from the mechanical structure and hydraulic system aspects; finally, the feasibility of the scheme is verified through prototype testing

The longer joystick greatly reduces the steering force and makes the operation easier

Otherwise, it is very easy to cause safety accidents during subsequent use

The larger the minimum ground clearance, the stronger the electric forklift's ability to adapt to the environment

Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model When driving on a larger slope allowed, the operator must keep the cargo on the counterbalanced electric forklift and slow down at the same time, and never accelerate

The operator should maintain a wide field of vision when driving the counterbalanced forklift to avoid collision with obstacles

When the AGV is driving at low speed with a full load and the deviation level is large, the distance from the instantaneous center to the vertical axis of the AGV is an important parameter to determine the space required for the vehicle's turning operation

The intensive use of through-type shelves has made forklifts a standard feature in warehousing, and only they can be competent for safe, fast, and green pickup

BYD new energy warehouse forklift charging process picture-

It is a professional warehousing equipment manufacturer integrating energy saving, environmental protection and quality

(2) Serialization The most obvious manifestation of forklift serialization is the variety

Models with fixed platforms are also available No harm to people and goods When the operation is smooth, turn the handle of the electric pallet truck left or right to change the direction However, although the electric lifting equipment produced by foreign manufacturers in the past was of good quality, it was too expensive to be popularized

Fault 3: Slow lifting speed or failure to lift Generally, it is because the oil tank is low in oil, and hydraulic oil needs to be added in time or replaced directly

Features of wheels of various materials: 1

Because it is low in price, its customer base is the most complex, small vendors, logistics centers, supermarkets, factories, and customers in various working conditions have their own needs

The development prospects of China's electric forklifts in the international market are optimistic, and they are also showing a rapid development trend in the domestic market

AGV fully automatically and correctly guides transport vehicles

(3) During the loading and unloading process, the forklift must be braked

Slowly accelerate to the ideal speed

If there are people nearby, please signal them to get out of the way

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info