亚洲精品在线观看视频,日韩中文一区,精品一区二区国产

BYD ECB160 New energy forklifts Distributor

High-position side fork detection: Test the stability of the side fork at different loads, different side fork heights, and different fork entry speeds

What should we do if the electric pallet truck makes an unusual noise? The truck manufacturer will tell you about it

are important factors affecting its price

Power battery products need to be safe, have high energy density and good high and low temperature performance, and they need to have high consistency

Even if the forks of the battery transporter can pass through the sockets of the double-sided pallet, they cannot be lifted

High safety factor All mechanical material equipment must make progress in safety design, otherwise it will be difficult to develop in the long run

It uses a small-volume hydraulic device, which is simple to operate and easy to use

The lifting height of the electric forklift should be able to unload and shovel goods on the shelf

Overall design of product structure The overall design of the product structure is carried out according to the modular concept, mainly considering three aspects: cargo lifting, cargo forks, and vehicle chassis: Cargo lifting: To facilitate the expansion of the lifting height in the future and reduce the center height of the vehicle, this unmanned forklift uses a telescopic gantry to achieve the lifting and lowering of the cargo platform

(4) When turning, if there are pedestrians or vehicles nearby, you should signal and refrain from making sharp turns at high speeds

After the forklift has been operating for a specified period of time, it should leave the cold storage and rest and replace the battery in the buffer zone

Regardless of the brand of the electric forklift, learning this maintenance knowledge is not only beneficial to protecting the safety of the goods, but also beneficial to the long-term and stable use of the electric forklift, allowing the electric forklift to maintain a good condition even during high-intensity work and extend the service life of the forklift

As the name suggests, electric transport trucks are electrically powered for lifting and driving

BYD ECB160 New energy forklifts Distributor

Therefore, correct maintenance has become more important, and companies and drivers need to pay more attention

Because it is pollution-free and has low noise, it is widely used in indoor operations and other working conditions with high environmental requirements, such as the pharmaceutical and food industries Electrical component reliability The main measures taken for electrical components are to prevent freezing and rust

In 2021, China's forklift sales reached 1

The larger the load, the more expensive it is

Explosion-proof grade: Ex IIB T4 Gb 6

As early as 2015, the "Guiding Opinions on Accelerating the Development of Life Service Industry and Promoting the Upgrading of Consumption Structure" issued by the State Council clearly pointed out: Actively develop new logistics service models such as cold chain logistics and integrated warehousing and distribution

However, although the electric lifting equipment produced by foreign manufacturers in the past was of good quality, it was too expensive to be popularized

Hydraulic system In terms of hydraulic synchronization, in order to avoid uneven loading of goods, uneven force on the four cylinders, and asynchronous movements, a gear-type hydraulic synchronous motor (also known as a split-flow motor) is designed at the center of the four cylinders

2 1 At present, most companies use this technology

Power Management: Equipped with the world's leading power management system for real-time monitoring of the battery, it can perform high-precision calculations on the charge status to ensure that the battery is always working in a safe state, and increase the battery cycle

If it is higher than the standard value, it indicates that the charging voltage is too high

We will lead the development trend of hybrid and electric technologies and provide customers with more energy-saving, compact, efficient and intelligent solutions

BYD ECB160 New energy forklifts Distributor 3

Forklift bearing broken The forklift bearing is a very important hardware component on the forklift

When the gap between the main bearing and the journal is too large, the front and rear oil seals will leak oil at the crankshaft head or the clutch due to sealing loss, causing the electric pallet truck friction plate to be contaminated and slip

However, there are still problems with the subsystems and technologies of unmanned warehousing, such as human-machine collaborative technology, cluster processing, and abnormal responses of equipment and systems

When driving outdoors, the speed should not exceed 10km/h

First, the flatness of the ground is checked by the gyroscope to ensure that the tilt of the entire vehicle meets the safety requirements

(1) When the BYD forklift is driving, the bottom of the fork should be kept 300-400mm above the ground and the mast should be tilted backward

Check the reversing buzzer and hazard warning lights; 7 Check whether the emergency cut-off switch of the electric pallet truck is turned off The use of helical teeth ensures optimal meshing, reduces noise levels and thus reduces noise pollution 1

The air humidity reaches 100%, and essence is produced on the surface of the motor

Impact of low temperature environment on mechanical system Lubricating oil and grease used at room temperature will also change their properties at low temperatures and are not suitable for use in cold storage environments; specially designed accessories are also required on precision components such as micro-openings, sensors, precision bearings, etc

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info