在线国产区,96看片,国产精品免费一区二区三区都可以

How to adjust the BYD side forklift when it does not move forward or backward?-

During operation, the forklift must not be overloaded, the center of the cargo must be in line with the center of gravity of the vehicle, and no eccentric loading is allowed

(7) When the vehicle is carrying cargo and traveling uphill or downhill at an angle exceeding 7 degrees and at a speed higher than first gear, the brakes must not be used unless in special circumstances

It refers to the maximum angle that the mast can tilt forward or backward relative to the vertical state when the electric forklift is in an unloaded state on a horizontal ground

Hyster has added a new stand-on electric pallet truck, the S2

Safety production education, You must drive with a license, and illegal operation is strictly prohibited

in various factories and mines

The following BYD forklift editor will share with you the precautions for using a forklift: 1

On the basis of primer spraying, the iron plate of the body can be sprayed with a low-temperature rust-resistant protective layer to cope with the huge temperature difference in the storage operation

After the electric forklift starts, you need to drive the electric forklift to the front of the goods and enter the working position

However, although the electric lifting equipment produced by foreign manufacturers in the past was of good quality, it was too expensive to be popularized

The forks are raised by an advanced electric hydraulic pump, and the forks are raised and lowered by the lifting and lowering operating handle

The following is a detailed share of its advantages by BYD lithium battery forklift editor: 1

The load center distance of the electric forklift of the electric forklift manufacturer is 500mm

Its working principle is to convert chemical energy into electrical energy

How to adjust the BYD side forklift when it does not move forward or backward?-0 to 45 The electric truck uses a battery as the power source A good forklift should take all details into consideration to fully ensure the safety of the driver, cargo and the forklift itself There are many ways to classify forklifts: according to the structural type and characteristics of the forklift, the mass that the forklift can lift, the movement mode of the forklift, etc

The application scenario guarantees the confidence of the product

Stable and reliable The air gap can be adjusted multiple times

Generally, electric forklift manufacturers will recommend customers to use electric forklifts in a suitable environment

There are great differences in the structure of the drive system of various forklifts, and there are also differences in the form of single-machine layout

Putting aside the brand of electric forklifts, let us now learn about the maintenance knowledge of electric transport trucks

The indoor use of the vehicle is very important

At the same time, it can meet the production needs of various electric forklifts and non-standard forklifts

BYD forklifts still have outstanding performance in cold chain logistics and have huge market development space

0SD offers increased speeds when loading and unloading, making it ideal for travelling long distances or working at loading docks

How to adjust the BYD side forklift when it does not move forward or backward?-

When cracks appear in the welding parts of the body of the electric pallet truck, secondary welding should be carried out in time

Clean the mud and other attachments on the outer shell regularly to avoid interfering with heat dissipation

If the operator's hands or shoes are stained with oil, it is easy to make operating errors and cause the forklift to lose control, so the operator should wipe his hands or shoes dry before driving

0 to 45

It has high storage efficiency and strong scenario applicability, but the cost is relatively high

Hold the left and right handles of the control handle with both hands, press them down to the tilted position, and move the control handle left and right to steer the vehicle

The minimum turning radius of a forklift refers to the minimum distance from the outermost side of the forklift to the turning center when the steering wheel is fully turned when the electric forklift is unloaded, that is, the minimum outer turning radius, and the minimum distance from the innermost side of the forklift to the turning center, that is, the minimum inner turning radius

Thank you! What are the functions of BYD forklifts? BYD forklifts have a certain share in the market, which fully proves its appeal and charm

Car body The body and frame of the forklift are integrated into one body and are made of profiled steel with resist welding There are many types of pallets on the market now

We are committed to providing the market with AGVs, AGV bodies and solutions with independent innovative brands and high cost performance, and providing customers with intelligent, convenient and high-quality products

The new architecture and edge computing architecture generated by 5G will soon meet the low-time, high-speed operation, and rapid decision-making requirements of driverless cars

If an accident happens, the consequences will be disastrous

It is strictly forbidden to use in blind areas; 9

It is strictly prohibited to load and unload the counterbalanced forklift manually to avoid safety problems

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info