欧美日韩国产成人在线,999精品视频,国产三级三级三级精品8ⅰ区

BYD tractor maintenance and repair schedule flow chart -

4 stop precision When the AGV reaches the target address and is ready to automatically cut, the error value (mm) between the actual position and the position set by the program

Since most internal combustion forklifts are used in ports, docks and working places, the environment in which they are used is relatively harsh, especially in the port and nursing industry If necessary, use a soft, lint-free, clean white towel to clean the carbon powder on the surface of the phase change groove and the motor commutator 6

Check cooling water and engine oil; 2

If an internal leakage occurs, we need to inspect and replace the leaking part

Counterbalanced forklift operators should try to avoid sudden stops and turns The net height in the container is required to be less than 2 This is actually the case when we buy any goods

, here we classify them according to the driving mode of the forklift

Companies in northern regions should pay more attention to this

Electric forklift It uses electric motor as power and battery as energy

When the thickness of the friction brake pad reaches the minimum thickness allowed, the friction brake disc must be replaced

BYD tractor maintenance and repair schedule flow chart -

The full load climbing ability of more than 8% makes the operation more common

If there is no abnormality during the retraction of the fork, after the fork returns to the middle position, in order to lower the center of gravity of the unmanned forklift, ensure the smooth and safe operation, and take into account the efficiency of cargo storage, the loading platform will fall back to 800mm above the ground

The raised part will hit the timing gear on the camshaft, causing abnormal engine noise

0 to 45

Factory operators are basically able to operate the equipment skillfully, but rarely can they solve the faults in the use of the equipment in a timely manner

Hydraulic oil, gear oil, and lubricating oil all use special low temperature resistant grease, which can enable the vehicle to obtain long-term stable hydraulic and transmission performance in the cold storage

If the driving control switch is loose and causes failure, lock it in time If the welding current enters the battery, it will cause damage

Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

Warehouse staff have to operate and record at the same time, which may lead to negligence, errors and omissions, and even affect the subsequent work; Improve accuracy: Inaccurate inventory of cargo locations will cause difficulty in finding goods during picking, disrupt picking routes, and thus reduce picking efficiency and accuracy; Improve operational efficiency: If it is impossible to monitor the internal warehousing logistics in a timely manner, and there is a lack of analysis of product data and shipping order data, warehousing management will be difficult and operational efficiency cannot be guaranteed If there is no damage, but it just needs maintenance, we can do it ourselves

After the forklift has been operating for a specified period of time, it should leave the cold storage and rest and replace the battery in the buffer zone

Do not turn it violently or accelerate suddenly

Forklift is a kind of equipment widely used in the logistics field

Using lithium battery design: Compared with traditional lead-acid batteries, BYD iron batteries have several major technical advantages: low use cost and battery cycle of about 10 years, which are unique advantages that traditional rechargeable batteries cannot match

BYD tractor maintenance and repair schedule flow chart -

The second is to refer to the manufacturer's positioning

Zhuoyi Forklift is such a company that takes "industry customization" as its strategic direction

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and improves the flexibility of operation

When vehicles enter and exit containers to load and unload goods, they should slow down, pay attention to the entry and exit height, and do not let the goods hit the roof to avoid damage to the goods Warm reminder: In addition to common models, non-standard customization can also be carried out according to the user's site, environment, cargo, and load to meet the needs of special environment

In addition, the heat of AC motors mainly occurs in the stator coils of the motor housing, which is convenient for cooling and heat dissipation

Once a dimension tolerance occurs, the unmanned forklift stops and the system alarms

When starting the forklift, maintain a moderate starting speed and do not start too hard

At the same time, due to the heavy weight of the cargo, in order to ensure the rigidity of the telescopic gantry at a high position, this unmanned forklift is designed with a double telescopic gantry

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

, Ltd

When using an electric pallet truck, you should first know the functions of its buttons

It is widely used in logistics, warehouses, factories, hospitals, schools, shopping malls, airports, stadiums, stations and airports, etc

久久久久黄色_国产91一区_久久99国产精品_欧美一区二_成人黄色在线视频_欧美一级黄色网

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info